fmco       26/10/2009 21:46

Host: No mostrado/ Not shown    IP: No mostrado/ Not shown    Sistema: Windows XP

Re: XbusTCO and NanoX-S88

Publicidad if both LED are off after power up the address you select in the DIP1-5 is ok. (if no other throttle have the same Xbus address) moving DIP6 you can select Lenz or Roco, it need to be as is programmend in the NanoX, if not, you'll get a displacement of 4 turnout addresses (turnout 10 will be 6 or 14) best regards, Paco

Respuestas (0)

XbusTCO and NanoX-S88 - Christoph - 18/10/2009 16:06  Re: XbusTCO and NanoX-S88 - brickrennes - 18/10/2009 22:19  Re: XbusTCO and NanoX-S88 - Christoph - 19/10/2009 00:06  Re: XbusTCO and NanoX-S88 - brickrennes - 19/10/2009 07:56  » Re: XbusTCO and NanoX-S88 « - fmco ® - 26/10/2009 21:46

Responder

Nombre E-Mail Asunto Web Enlace a una imagen Notificar por e-mail respuestas. Mensaje >if both LED are off after power up the address you select in the DIP1-5 is ok. (if no other throttle have the same Xbus address) > >moving DIP6 you can select Lenz or Roco, it need to be as is programmend in the NanoX, if not, you'll get a displacement of 4 turnout addresses (turnout 10 will be 6 or 14) > >best regards, > >Paco      Ver mi mensaje despues de insertarlo.